Silicones, Foam & Acrylics

fischer Injection Mortar FIS P Plus 300 T Polyester Chemical Anchor 490g 300ml-Size: 300 ml-Maximum processing time: 2-13 min-Minimum curing time: 35 min - 3 hrs, In wet concrete or water filled holes the curing times must be doubled-With FIS P Plus, anchorings in masonry and non-cracked concrete for which approval is relevant can be realised in a particularly economical manner. FIS P Plus 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. As a result, procurement costs can be reduced on the basis of polyester resin.-Brand: fischer-Made in: Germany-Ref: fischer-522430-Unit: Pcs

Read more less

Asmaco Triple Expanding Multi Purpose PU Foam Spray 750mlOne-component, ready-to-use moisture-curing polyurethane foam primarily used for sealing insulation sheets and filling joints and cavities in walls and ceilings. With a closed-cell structure, it is resistant to water absorption and offers excellent thermal insulation and very good acoustic properties. This foam is suitable for sealing high-volume, low-movement gaps and is CFC-free-Size: 750 ml-Foam Free: 10 min-Cut through: 60 min-Processing Temprature: +5°C ~ +45°C-Long-term Resistance Range: -40°C ~ +90°C-Brand: Asmaco-Made in: U.A.E-Ref: ASMCO-PU Foam-750ml-Unit: PcsUSE: Can to be used with valve pointing downwards. By activating the valve adapter the amount of foam can be dosed and assembled.Joints and cavities should only be filled 50%. Foam should be applied in beads. Wait for 1-2 hours before applying a new layer in large joints. Moisturize between layers.IMPORTANT: To be used in well-ventilated areas. Do not smoke, protect eyes and wear protective clothing. Protect floors with paper or PE foil .PU stains should be removed with PU cleaner or acetone immediately. Cured for can only be removed mechanically.

Read more less