fischer Injection Mortar FIS P Plus 300 T Polyester Chemical Anchor 490g 300ml-Size: 300 ml-Maximum processing time: 2-13 min-Minimum curing time: 35 min - 3 hrs, In wet concrete or water filled holes the curing times must be doubled-With FIS P Plus, anchorings in masonry and non-cracked concrete for which approval is relevant can be realised in a particularly economical manner. FIS P Plus 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. As a result, procurement costs can be reduced on the basis of polyester resin.-Brand: fischer-Made in: Germany-Ref: fischer-522430-Unit: Pcs
Asmaco Triple Expanding Multi Purpose PU Foam Spray 750mlOne-component, ready-to-use moisture-curing polyurethane foam primarily used for sealing insulation sheets and filling joints and cavities in walls and ceilings. With a closed-cell structure, it is resistant to water absorption and offers excellent thermal insulation and very good acoustic properties. This foam is suitable for sealing high-volume, low-movement gaps and is CFC-free-Size: 750 ml-Foam Free: 10 min-Cut through: 60 min-Processing Temprature: +5°C ~ +45°C-Long-term Resistance Range: -40°C ~ +90°C-Brand: Asmaco-Made in: U.A.E-Ref: ASMCO-PU Foam-750ml-Unit: PcsUSE: Can to be used with valve pointing downwards. By activating the valve adapter the amount of foam can be dosed and assembled.Joints and cavities should only be filled 50%. Foam should be applied in beads. Wait for 1-2 hours before applying a new layer in large joints. Moisturize between layers.IMPORTANT: To be used in well-ventilated areas. Do not smoke, protect eyes and wear protective clothing. Protect floors with paper or PE foil .PU stains should be removed with PU cleaner or acetone immediately. Cured for can only be removed mechanically.
Toyo PU Foam Spray 750ml-Size: 750 ml-Foam Free: 10 minutes-Cut through: 30 minutes-Processing Temprature: +5°C ~ +35°C-Optimun Processing: +18°C ~ +25°C-Short-term Resistance Range: -40°C ~ +110°C-Long-term Resistance Range: -30°C ~ +80°C
-How to apply TOYO Spray PU foam:
Shake can well to make the foam ready for use
Clean the substrate and spray some water on it Screw foam dispenser on tightly and turn can upside down.
Vertical fill the gaps from the bottom upwards
Foam is tack-free (dry to the touch ) in 8~10 minutes in temperatures will result in faster setup times
Remove unwanted cured foam by cutting it with knife
-Made in: China-Ref: Toyo-PU Foam-750ml-Unit: Pcs
Nice Neutral Silicone Sealant Black 280ml | N-789-Type: Silicon Without Acid-Color: Black-Size: 280 ml-Working Time: 15 minutes-Tack-free Time: 30 minutes-Curing Speed: 1-3 mm/day-Curing Time: 7-14 days-Application Temperature: 4°C to 40°C-Temperature Resistance: -30 °C to 90 ℃-MULTIPLE USAGE: It can be used for joint sealing and waterproofing between indoor and outdoor materials, doors and windows, ceramic tile, TV backdrop, bathroom, sun room, floor bonding, Glass curtain wall, Aluminum composite panel, baseboard, Color steel title, window seal, shop.-STRUCTURAL ADHESIVE DOSAGE ESTIMATION: 5 mm wide rubber strip, one glue can be about 8-10 meters; For a strip of 1 cm wide, one piece of glue can be used for about 4-5 meters.-Brand: Nice-Made in: China-Model: N-789-Ref: NICE-N789-Ntrl-BK-280ml-Unit: Pcs
Asmaco Neutral Silicone Sealant Clear 300g | 2650-Type: Silicon Without Acid-Color: Clear-Size: 280 ml-Temperature Resistance: -20 °C to 110 ℃-MULTIPLE USAGE: It can be used for joint sealing and waterproofing between indoor and outdoor materials, doors and windows, ceramic tile, TV backdrop, bathroom, sun room, floor bonding, Glass curtain wall, Aluminum composite panel, baseboard, Color steel title, window seal, shop.-STRUCTURAL ADHESIVE DOSAGE ESTIMATION: 5 mm wide rubber strip, one glue can be about 8-10 meters; For a strip of 1 cm wide, one piece of glue can be used for about 4-5 meters.-Brand: Asmaco-Made in: U.A.E-Model: 2650-Ref: ASMCO-2650-Slcon-Tb-Ntrl-Trns-300ml-Unit: Pcs
Seal, bond, and secure with our premium range of chemical products. Explore our high-quality acrylics, silicones, foams, and polyester chemical anchors for a variety of applications. Trust our reliable solutions to provide strong and durable bonds, ensuring long-lasting performance in construction and DIY projects.
